PI1M -Optris
Compact infrared camera for metal applications, 450 °C to 1800 °C
The newly developed thermal camera optris PI 1M is especially suited for temperature measurements of metals, as these exhibit a distinctly higher emissivity at the short measurement wavelength of 1μm than at measurements in the previously conventional wavelength range of 8-14 μm.
In parallel with the visualization of a thermal process, the high-performance sensor electronics allow a short reaction time of 1ms for the displaying of the temperature information of the center pixel.
Technical specifications
Spectral range: 0.85 – 1.1 μm
Optical resolution (switchable)/ Frame rate:
764 x 480 pixels @ 32 Hz
382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
72 x 56 pixels @ 1 kHz
764 x 8 pixels @ 1 kHz (fast linescanning mode)
Temperature ranges for optics f=16 mm, f=25 mm:
450 ... 1800 °C (27 Hz mode)
500 ... 1800 °C (80 Hz and 32 Hz mode)
600 ... 1800 °C (1 kHz mode)
Temperature ranges for optics f=50 mm, f=75 mm:
525 ... 1800 °C (27 Hz mode)
575 ... 1800 °C (80 Hz and 32 Hz mode)
675 ... 1800 °C (1 kHz mode)
Selectable lenses:
FOV @ 382 x 288 px:
20° x 15° (f = 16 mm)
13° x 10° (f = 25 mm)
7° x 5° (f = 50 mm)
4° x 3° (f = 75 mm)
FOV @ 764 x 480 px:
39° x 25° (f = 16 mm)
26° x 16° (f = 25 mm)
13° x 8° (f = 50 mm)
9° x 5° (f = 75 mm)
Thermal sensitivity (NETD)1): < 2 K (< 900 °C), < 4 K (< 1400 °C)
System accuracy (at ambient temperature 23 ± 5°C)2):
For object temperature < 1400 °C: ±1 % of reading for 27/32/80 Hz ±1,5 % of reading for 1 kHz
For object temperature < 1600 °C: ±2 % of reading for 27/32/80 Hz ±2,5 % of reading for 1 kHz
PC interface: USB 2.0
High speed analog output (@ 1 kHz mode):
0 – 10 V real time output of the center pixel (1 ms response time)
Standard Process interface (PIF):
0 – 10 V input, digital input (max. 24 V), 0 – 10 V output
Industrial PIF:
2x 0 – 10 V input, digital input (max. 24 V),
3x 0/4-20 mA output, 3x relay (0 – 30 V/ 400 mA), fail-safe relay
Ambient temperature (TAmb): 5 ... 50 °C