FT10-RT433-CS – Nokeval

The FT10-TR433-CS wireless transmitter

An external 4-wire RTD cable sensor or M12 RTD probe can be connected to the FT10-RT433-CS transmitter. This transmitter contains an internal M12 connector. This instrument is very suitable for measurements where the sensor needs to be exchanged quickly on a regular basis or where sensors have a shorter product life because of the process/technique used. Because you can remove a certain sensor and then attach another sensor to it very quickly. This means that the measuring process can be resumed immediately.

The FT10-RT433-CS transmitter consists of a radio part (the antenna) and a measuring module, connect a PT100 sensor to create temperature measurements. These wireless instruments communicate with each other via a MHz signal. The battery-powered 10 MW transmitters have a range in open space of several kilometres and the practical range indoors is approximately 30 to 300 meters (depending on the amount of steel and glass in a building). The modulation technique tolerates other traffic on the same band very well.

Please note, the FT10 product series from Nokeval has now been replaced by the Flex product series (FT10-series is however still available). These are comparable in terms of technology, construction of the transmitter and components. However, the Flex transmitters communicate wirelessly with each other via LoRa (stands for: Long Range signal), this is wireless communication with noise suppression/cancelling. The FT10 series communicates at 433,92 MHz without noise reduction and therefore the practical range distances are a little shorter.